BlueOptics CWDM Multiplexer Racklösung, 4-Channel, Singlemode, 1HE

Solution for Fiber to the X (FTTX)

BlueOptics passive 4 Channel Multiplexer/Demultiplexer as 19" chassis rack version for increasing the transmission capacity of optical data signals from in optical fiber connections by combining different wavelengths on one fiber. This allows different services to be combined on one connection. BlueOptics passive 4 Channel Multiplexers/Demultiplexers can be operated without power supply and are designed for maximum ranges on single-mode optical fibers.

Full Utilization of Your Fiber

BlueOptics passive Multiplexers bundle several optical signals and thus enable their transmission via one fiber (multiplexing). On the opposite side, these signals are unbundled again with a Demultiplexer in order to divide the signals again into several fibers (demulitplexing). This is done under consideration of the CWDM grid according to ITU G.694.2.

Best Attenuation Values

BlueOptics 4 Channel Multiplexers have best attenuation values because of a low input attenuation (Input Loss) and a high return loss (Return Loss). 4 Channel Multiplexers are primarily used in Fiber to the Home (FTTH) Networks, Fiber to the Point (FTTX) Networks, Passive Optical Networks (PON), Gigabit Passive Optical Networks (GPON), Local Area Networks (LAN) and Cable Television (CATV) installations or just for easy optical signal distribution.

Highest Component Quality

For lossless transmission services exclusively branded fibers from well known manufacturers such as Corning, Fujikura or YOFC are used in the production process of BlueOptics 4 Channel Multiplexer Solutions. All installed plugs are manufactured with highly reliable zirconia ceramic ferrule of brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari and achieve a lifetime of up to 1500 mating cycles.

Interference-free Transmission

All BlueOptics 4 Channel Multiplexer Solutions are tested after production with interferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the input loss and return loss values is included with every shipped 4 Channel Multiplexer Rack Version.

BlueOptics 4 Channel Multiplexer solutions meet Telcordia GR-326 requirements-Core 4.4.

Industrial Standards

BlueOptics 4 Channel Multiplexers are manufactured to meet generally accepted industry standards and norms. All used cables are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates a very low smoke emission in comparison to PVC coated cables. Furthermore no halogen is released.

BlueOptics 4 Channel Multiplexers meet the following Norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.

Every BlueOptics 4 Channel Multiplexer is covered by a 5-year function warranty by CBO.

For the lifetime of the product you receive technical support via email and telephone.

The CBO preliminary exchange encompasses free shipping of replacement products on the next working day.

Act Now!

By using BlueOptics 4 Channel Multiplexer solutions networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Fiber Optic 4 Channel Multiplexers you can improve your connections and reduce your OPEX and CAPEX.