|Channels:||18 Channel CWDM|
|Nanometer:||1270nm to 1610nm|
|Power supply:||no voltage necessary|
|Line:||1x LC/UPC Duplex|
|CWDM-Connection:||18x LC/UPC Duplex|
Solution for Fiber to the X (FTTX)
BlueOptics passive 18 Channel CWDM Multiplexer/Demultiplexer as 1U 19" chassis rack version for increasing the transmission capacity of optical data signals from 1270nm to 1610nm in optical fiber connections by combining different wavelengths on one fiber. This allows different services to be combined on one connection. BlueOptics passive 18 Channel CWDM Multiplexers/Demultiplexers can be operated without power supply and are designed for maximum ranges on single-mode optical fibers.
Full Utilization of Your Fiber
BlueOptics passive Multiplexers bundle several optical signals and thus enable their transmission via one fiber (multiplexing). On the opposite side, these signals are unbundled again with a Demultiplexer in order to divide the signals again into several fibers (demulitplexing). This is done under consideration of the CWDM grid according to ITU G.694.2.
Best Attenuation Values
BlueOptics 18 Channel CWDM Multiplexers have best attenuation values because of a low input attenuation (Input Loss) and a high return loss (Return Loss). 18 Channel CWDM Multiplexers are primarily used in Fiber to the Home (FTTH) Networks, Fiber to the Point (FTTX) Networks, Passive Optical Networks (PON), Gigabit Passive Optical Networks (GPON), Local Area Networks (LAN) and Cable Television (CATV) installations or just for easy optical signal distribution.
Highest Component Quality
For lossless transmission services exclusively branded fibers from well known manufacturers such as Corning, Fujikura or YOFC are used in the production process of BlueOptics 18 Channel CWDM Multiplexer Solutions. All installed plugs are manufactured with highly reliable zirconia ceramic ferrule of brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari and achieve a lifetime of up to 1500 mating cycles.
All BlueOptics 18 Channel CWDM Multiplexer Solutions are tested after production with interferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the input loss and return loss values is included with every shipped 18 Channel CWDM Multiplexer Rack Version.
BlueOptics 18 Channel CWDM Multiplexer solutions meet Telcordia GR-326 requirements-Core 4.4.
BlueOptics 18 Channel CWDM Multiplexers are manufactured to meet generally accepted industry standards and norms. All used cables are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates a very low smoke emission in comparison to PVC coated cables. Furthermore no halogen is released.
BlueOptics 18 Channel CWDM Multiplexers meet the following Norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Every BlueOptics 18 Channel CWDM Multiplexer is covered by a 5-year function warranty by CBO.
For the lifetime of the product you receive technical support via email and telephone.
The CBO preliminary exchange encompasses free shipping of replacement products on the next working day.
By using BlueOptics 18 Channel CWDM Multiplexer solutions networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Fiber Optic 18 Channel CWDM Multiplexers you can improve your connections and reduce your OPEX and CAPEX.