Solution for Fiber to the X (FTTX)
BlueOptics© Planar Lightwave Circuit (PLC) Splitter Rack Version with single-mode G.657.A1 fibers for splitting or merging of optical signals for the data transmission of several participants via one optical fiber.
More Ports, Less Maintenance
The BlueOptics PLC Splitter Rack Version distributes a single fiber to several other fibers, also the reverse handling is possible. The BlueOptics PLC Splitter Rack Version works with a low error rate and a uniform split behavior over the entire wavelength range from 1260nm to 1650nm. Because of the passive construction of the BlueOptics PLC no additional power sources are required, which increases the reliability of the Splitter Rack Version making a complicated configuration unnecessary.
Best Attenuation Values
BlueOptics PLC Splitter Rack Version have an attenuation value of 0.4db per kilometer, a low input attenuation (Input Loss) and a high return loss (Return Loss). Further optimization of the return loss by adjusting the polish (UPC or 8°APC) is possible. In addition, the product achieves an attenuation of only 3dB for every 1:2 split. PLC Splitter Rack Version are primarily used in Fiber to the Home (FTTH) Networks, Fiber to the Point (FTTX) Networks, Passive Optical Networks (PON), Gigabit Passive Optical Networks (GPON), Local Area Networks (LAN) and Cable Television (CATV) installations or just for easy optical signal distribution.
Highest Component Quality
For lossless transmission services exclusively branded fibers from well known manufacturers such as Corning, Fujikura or YOFC are used in the production process of BlueOptics BOSPP2xNLPLPA PLC Splitter Rack Version Solutions. All installed plugs are manufactured with highly reliable zirconia ceramic ferrule of brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari and achieve a lifetime of up to 1500 mating cycles.
BlueOptics BOSPP2xNLPLPA PLC Splitter Rack Version are tested after production with interferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the input loss and return loss values is included with every shipped BOSPP2xNLPLPA PLC Splitter Rack Version.
BlueOptics BOSPP2xNLPLPA PLC Splitter Rack Version Solutions meet Telcordia GR-326 requirements-Core 4.4.
BlueOptics BOSPP2xNLPLPA PLC Splitter Rack Version are manufactured to meet generally accepted industry standards and norms and are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates a very low smoke emission in comparison to PVC coated patch cords. Furthermore no halogen is released.
BlueOptics BOSPP2xNLPLPA PLC Splitter Rack Version meet the following Norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Every BlueOptics BOSPP2xNLPLPA PLC Splitter Rack Version is covered by a 5-year function warranty by CBO.
For the lifetime of the product you receive technical support via email and telephone.
The CBO preliminary exchange encompasses free shipping of replacement cable on the next working day.
By using the BlueOptics PLC Splitter Rack Version, networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Fiber Optic Patch Cords you can improve your connections and reduce your OPEX and CAPEX.