Fiber to the X (FTTX) Solution
BlueOptics Planar Lightwave Circuit (PLC) Splitter Rack 1x4 solution for single-mode G.657.A1 fibers for splitting or merging optical signals for data transmission for multiple subscribers over one fiber.
More Ports, Less Maintenance
The BlueOptics PLC Splitter as Rack 1x4 solution distributes a single fiber to several other fibers, whereby the reverse handling is also possible. The BlueOptics PLC Splitter as Rack 1x4 solution works with a low error rate and a uniform splitting behavior over the entire wavelength range from 1260nm to 1650nm. Due to the passive design of the BlueOptics PLC Splitter, no additional power sources are required, which increases the reliability of the PLC Splitter and makes a complicated configuration unnecessary.
Best Attenuation Values
BlueOptics PLC Splitters as Rack 1x4 solution have a damping value of 0.4dB per kilometer, a low input loss and a high return loss. Furthermore, the product achieves an attenuation value of only 3dB for each 1:2 split. BlueOptics PLC splitters are used as Rack 1x4 solution in Fiber to the Home (FTTH) networks, Fiber to the Point (FTTX) networks, Passive Optical Networks (PON), Gigabit Passive Optical Networks (GPON), Local Area Networks (LAN) and Cable Television (CATV) installations or for simple optical signal distribution.
Highest Component Quality
For loss-free transmission performance, BlueOptics PLC splitters are produced as Rack 1x4 solutions using only branded fibers from well-known manufacturers such as Corning, Fujikura or YOFC. All built-in connectors are manufactured by brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari with highly reliable BlueOptics zirconia ceramic ferrule and achieve a lifetime of up to 1500 mating cycles.
BlueOptics PLC Splitters as Rack 1x4 solution are tested for quality after production with interferometer and optical time domain reflectometry (OTDR). A measurement report of the input loss and return loss values is included with every delivered PLC Splitter as Rack 1x4 solution.
BlueOptics PLC Splitters as Rack 1x4 solution meet Telcordia requirements GR-326-Core 4.4.
BlueOptics PLC Splitters as Rack 1x4 solution are manufactured under consideration of generally valid industrial standards and norms to guarantee a faultless and undisturbed transmission of your data in your network.
All BlueOptics PLC Splitters as Rack 1x4 solution consider the following norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Every BlueOptics PLC Splitter is covered by a 25-year function warranty by CBO.
For the lifetime of the product you receive technical support via email and telephone.
The CBO preliminary exchange encompasses free shipping of replacement splitter on the next working day.
By using BlueOptics PLC splitters as Rack 1x4 solution, networks can be prepared for increasing requirements. Regardless of whether an increased data volume, higher transfer rates, greater scalability, higher performance and/or higher reliability is desired. With BlueOptics Fiber PLC Splitters as Rack 1x4 solution you can optimize your connections and reduce your OPEX and CAPEX costs.
There are no reviews yet.