Solution for Fiber to the X (FTTX)
BlueOptics passive CWDM Multiplexer/Demultiplexer as Bare Solution version for increasing the transmission capacity of optical data signals in optical fiber connections by combining different wavelengths on one fiber. This allows different services to be combined on one connection. BlueOptics passive CWDM Multiplexers/Demultiplexers can be operated without power supply and are designed for maximum ranges on single-mode optical fibers.
Full Utilization of Your Fiber
BlueOptics passive Multiplexers bundle several optical signals and thus enable their transmission via one fiber (multiplexing). On the opposite side, these signals are unbundled again with a Demultiplexer in order to divide the signals again into several fibers (demulitplexing). This is done under consideration of the CWDM grid according to ITU G.694.2.
Best Attenuation Values
BlueOptics CWDM Multiplexer Bare Solution Versions have best attenuation values because of a low input attenuation (Input Loss) and a high return loss (Return Loss). CWDM Multiplexer Bare Solution Versions are primarily used in Fiber to the Home (FTTH) Networks, Fiber to the Point (FTTX) Networks, Passive Optical Networks (PON), Gigabit Passive Optical Networks (GPON), Local Area Networks (LAN) and Cable Television (CATV) installations or just for easy optical signal distribution.
Highest Component Quality
For lossless transmission services exclusively branded fibers from well known manufacturers such as Corning, Fujikura or YOFC are used in the production process of BlueOptics CWDM Multiplexer Bare Solution Version Solutions. All installed plugs are manufactured with highly reliable zirconia ceramic ferrule of brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari and achieve a lifetime of up to 1500 mating cycles.
BlueOptics CWDM Multiplexer Bare Solution Version Solutions are tested after production with interferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the input loss and return loss values is included with every shipped CWDM Multiplexer Bare Solution Version.
BlueOptics CWDM Multiplexer Bare Solution Version solutions meet Telcordia GR-326 requirements-Core 4.4.
BlueOptics CWDM Multiplexer Bare Solution Version solutions are manufactured to meet generally accepted industry standards and norms. All used cables are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates a very low smoke emission in comparison to PVC coated cables. Furthermore no halogen is released.
BlueOptics CWDM Multiplexer Bare Solution Versions meet the following Norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Every BlueOptics CWDM Multiplexer Bare Solution Version is covered by a 5-year function warranty by CBO.
For the lifetime of the product you receive technical support via email and telephone.
The CBO preliminary exchange encompasses free shipping of replacement products on the next working day.
By using BlueOptics CWDM Multiplexer Bare Solution Version solutions networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Fiber Optic CWDM Multiplexers you can improve your connections and reduce your OPEX and CAPEX.