Optimal Fiber Connections
BlueOptics© SFA22BK10 10dB Fiber Optic Attenuator for single-mode (9/125µm) fiber links G.652.D (from 1270nm to 1610nm) from CBO, with SC/PC Simplex connector and highly reliable ceramic ferrule. The attenuation of optical fibers refers to the loss of energy of the light beam, which occurs when passing through a fiber in form of absorption and scattering. In order to reduce the signal level on a glass fiber line fiber attenuators are used to increase the damping. Mainly on short distances the installation of an attenuator may be necessary, so the high transmission power does not override the recipient.
Best Attenuation Values
All BlueOptics SFA22BK10 10dB SC/PC Fiber Optic Attenuators have a low input loss and a high return loss. Further optimization of the return loss by adjusting the polish (UPC or 8°APC) is possible. By default BlueOptics SFA22BK10 10dB SC/PC Fiber Optic Attenuators are available in the attenuation stages 1, 2, 3, 5, 7, 10, 15, 20, 25 and 30dB and are designed for working in temperature ranges from -40°C to +75°C.
Highest Quality Components
For lossless transmissions exclusively branded fibers from well-known manufacturers such as Corning, Fujikura or YOFC are used in the production process of BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuators. All installed connectors are manufactured by brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari with highly reliable BlueOptics Zirconia ceramic ferrule and achieve a lifetime of up to 1500 mating cycles.
BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuators are tested after production with interferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the input loss and return loss values is included with every shipped BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuator.
BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuators meet the Telcordia Requirements GR-326-Core 4.4.
BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuator are manufactured to meet generally accepted industry standards and norms and are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates a very low smoke emission in comparison to PVC coated Fiber Attenuators. Furthermore no halogen is released.
BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuators meet the following Norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Every BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuator is covered by a 25-year function warranty by CBO.
For the lifetime of the product you receive technical support via email and telephone.
The CBO preliminary exchange encompasses free shipping of replacement cable on the next working day.
Durch den Einsatz von BlueOptics SFA22BK10 10dB SC/PC Fiber Attenuators networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics SC/PC Fiber Attenuators you can improve your connections and reduce your OPEX and CAPEX.