MPO/MTP Cable
An optical MPO/MTP Trunk cable Fiber Patch Cord consists of a core of glass, which provides a high refractive index, surrounded by a low refractive index cladding. This is also reinforced with aramide threads to prevent physical damage of the MPO/MTP Trunk cable Fiber Patch Cord core and the sheathing, which is ultimately surrounded by a synthetic sheathing for protection. This allows MPO/MTP Trunk cable Fiber Patch Cords to transmit optical signals from point to point with low signal loss, even at large distances. MPO/MTP Trunk cable Fiber Patch Cords are mainly used for the connection of optical transceivers, patch panels and further extensions of optical fiber connections of existing high-speed networks. MPO/MTP Trunk cable Fiber Patch Cords can interconnect routers, servers, firewalls, load balancers, FTTX systems and similar hardware with other optical ports among each other. MPO/MTP Trunk cable Fiber Patch Cords are available in different variants, enabling multi-mode and single-mode data transfers without bandwidth limitation.
MPO/MTP Trunk cable Fiber Patch Cords are available in different versions with different fiber categories. Here can be differentiated between Multi-mode MPO/MTP Trunk cable Fiber Patch Cord and Single-mode MPO/MTP Trunk cable Fiber Patch Cords. Multi-mode fibers in MPO/MTP Trunk cable Fiber Patch Cords are currently available in 4 categories for transmissions in the first optical window due to their development history: OM1, OM2, OM3 and OM4 (the OM letters stand for Optical Multi-mode). Each Multi-mode fiber differs in its modal bandwidth.
OM1 MPO/MTP Trunk cable Fiber Patch Cords usually have an orange colored sheathing and have a core size of (G62.5/125) 62.5 micrometers (µm); the modal bandwidth is 200 MHz/km at 850nm. OM1 MPO/MTP Trunk cable Fiber Patch Cords can transmit 10 Gigabit data links over a length of up to 33 meters. However, it is most commonly used for 100 Megabit applications. This type is usually used for signal transmissions of LED light sources.
OM2 MPO/MTP Trunk cable Fiber Patch Cords also usually have an orange sheathing. The core size is (G50/125) 50 micrometers (µm), the modal bandwidth is 500 MHz/km at 850nm. OM2 MPO/MTP Trunk cable Fiber Patch Cords support up to 10 gigabit data links up to 82 meters in length, but are more commonly used for gigabit applications. OM2 MPO/MTP Trunk cable Fiber Patch Cords are also commonly used for signal transmissions of LED light sources.
OM3 MPO/MTP Trunk cable Fiber Patch Cords usually have a turquoise (or aqua)-sheathing. As with OM2 MPO/MTP Trunk cable Fiber Patch Cords, the core size of OM3 MPO/MTP Trunk cable Fiber Patch Cords is (G50/125) 50 micrometers (µm), but the modal bandwidth is 1500 MHz/km at 850nm. OM3 MPO/MTP Trunk cable Fiber Patch Cords support 10 Gigabit on lengths of up to 300 meters. In addition, 40 Gigabit and 100 Gigabit transmissions can be implemented with OM3 MPO/MTP Trunk cable Fiber Patch Cords on up to 100 meters, but 10 Gigabit is the most frequent application bandwidth. Unlike OM1 MPO/MTP Trunk cable Fiber Patch Cords and OM2 MPO/MTP Trunk cable Fiber Patch Cords, OM3 MPO/MTP Trunk cable Fiber Patch Cords are used in combination with 850nm VCSEL (Vertical Cavity Surface-Emitting Laser) light sources.
OM4 MPO/MTP Trunk cable Fiber Patch Cords usually has a turquoise (or aqua) or magenta-colored sheathing. OM4 MPO/MTP Trunk cable Fiber Patch Cords are an extended and improved version of OM3 MPO/MTP Trunk cable Fiber Patch Cords. OM4 MPO/MTP Trunk cable Fiber Patch Cords have a modal bandwidth of 3500 MHz/km at 850nm and also use a (G50/125) 50 micrometer (µm) core, but they support 10 gigabit link to lengths of up to 550 meters and 100 gigabit links on lengths of up to 150 meters. OM4 MPO/MTP Trunk cable Fiber Patch Cords are also used in conjunction with 850nm VCSEL light sources.
Single-mode MPO/MTP Trunk cable Fiber Patch Cords, on the other hand, are suitable for transmissions in the second and third optical window between 1271nm and 1611nm. High quality Single-mode MPO/MTP Trunk cable Fiber Patch Cords are predominantly manufactured with G.652.D OS2 fibers. Single-mode MPO/MTP Trunk cable Fiber Patch Cords have a (E9/ 125) 50 micrometer (µm) core and, like Multi-mode MPO/MTP Trunk cable Fiber Patch Cords, Single-mode G.652.D MPO/MTP Trunk cable Fiber Patch Cords have a modal dispersion which results from multiple spatial modes, which is, however, more narrow. Single-mode G.652.D MPO/MTP Trunk cable Fiber Patch Cords are therefore better suited to maintain the accuracy of each light signal over longer distances. For these reasons, Single-mode G.652.D OS2 MPO/MTP Trunk cable Fiber Patch Cords are also more suitable for transmissions with a higher bandwidth.
OM1 MPO/MTP Trunk cable Fiber Patch Cords usually have an orange colored sheathing and have a core size of (G62.5/125) 62.5 micrometers (µm); the modal bandwidth is 200 MHz/km at 850nm. OM1 MPO/MTP Trunk cable Fiber Patch Cords can transmit 10 Gigabit data links over a length of up to 33 meters. However, it is most commonly used for 100 Megabit applications. This type is usually used for signal transmissions of LED light sources.
OM2 MPO/MTP Trunk cable Fiber Patch Cords also usually have an orange sheathing. The core size is (G50/125) 50 micrometers (µm), the modal bandwidth is 500 MHz/km at 850nm. OM2 MPO/MTP Trunk cable Fiber Patch Cords support up to 10 gigabit data links up to 82 meters in length, but are more commonly used for gigabit applications. OM2 MPO/MTP Trunk cable Fiber Patch Cords are also commonly used for signal transmissions of LED light sources.
OM3 MPO/MTP Trunk cable Fiber Patch Cords usually have a turquoise (or aqua)-sheathing. As with OM2 MPO/MTP Trunk cable Fiber Patch Cords, the core size of OM3 MPO/MTP Trunk cable Fiber Patch Cords is (G50/125) 50 micrometers (µm), but the modal bandwidth is 1500 MHz/km at 850nm. OM3 MPO/MTP Trunk cable Fiber Patch Cords support 10 Gigabit on lengths of up to 300 meters. In addition, 40 Gigabit and 100 Gigabit transmissions can be implemented with OM3 MPO/MTP Trunk cable Fiber Patch Cords on up to 100 meters, but 10 Gigabit is the most frequent application bandwidth. Unlike OM1 MPO/MTP Trunk cable Fiber Patch Cords and OM2 MPO/MTP Trunk cable Fiber Patch Cords, OM3 MPO/MTP Trunk cable Fiber Patch Cords are used in combination with 850nm VCSEL (Vertical Cavity Surface-Emitting Laser) light sources.
OM4 MPO/MTP Trunk cable Fiber Patch Cords usually has a turquoise (or aqua) or magenta-colored sheathing. OM4 MPO/MTP Trunk cable Fiber Patch Cords are an extended and improved version of OM3 MPO/MTP Trunk cable Fiber Patch Cords. OM4 MPO/MTP Trunk cable Fiber Patch Cords have a modal bandwidth of 3500 MHz/km at 850nm and also use a (G50/125) 50 micrometer (µm) core, but they support 10 gigabit link to lengths of up to 550 meters and 100 gigabit links on lengths of up to 150 meters. OM4 MPO/MTP Trunk cable Fiber Patch Cords are also used in conjunction with 850nm VCSEL light sources.
Single-mode MPO/MTP Trunk cable Fiber Patch Cords, on the other hand, are suitable for transmissions in the second and third optical window between 1271nm and 1611nm. High quality Single-mode MPO/MTP Trunk cable Fiber Patch Cords are predominantly manufactured with G.652.D OS2 fibers. Single-mode MPO/MTP Trunk cable Fiber Patch Cords have a (E9/ 125) 50 micrometer (µm) core and, like Multi-mode MPO/MTP Trunk cable Fiber Patch Cords, Single-mode G.652.D MPO/MTP Trunk cable Fiber Patch Cords have a modal dispersion which results from multiple spatial modes, which is, however, more narrow. Single-mode G.652.D MPO/MTP Trunk cable Fiber Patch Cords are therefore better suited to maintain the accuracy of each light signal over longer distances. For these reasons, Single-mode G.652.D OS2 MPO/MTP Trunk cable Fiber Patch Cords are also more suitable for transmissions with a higher bandwidth.
MPO (Multi-fiber Push-On) - This type of optical fiber connector was invented by NTT in the 1980s. The MPO connector provides multi-fiber configurations for multimode or single-mode connections, in standard with 4, 8, 12 or 24 fiber cores, but is also available as a custom option with up to 72 cores. The distance between the glass fibers is 250µm, so the MPO connector is a high-density solution that can make many glass fiber cores available in a single ferrule. The MPO connector has a glass fiber reinforced ferrule with a diameter of 2.5mm and a length of 6.4mm, which is slightly larger than an MTRJ connector. The MPO plug has a push-pull latch with sliding sleeve and two alignment pins at the end of the ferrule. This connector has been standardized in IEC-61754-7.
MTP (Multi-Fiber Termination Push-On) - The MTP connector is a further development of the MPO connector connection and a trademark of the US company US Conec. MTP connectors go further in the definitions of the standards even further than the MPO connector standard in order to improve the transmission quality or the contact a bit further. The biggest change is the shape of the guide pin. While an angled pin is used with MPO, a rounded pin is used with MTP. This has the advantage that the guide pin hole of the MPO / MTP socket is less stressed, can be reconnected more frequently and thus improves the contact of the individual fibers.
MTP (Multi-Fiber Termination Push-On) - The MTP connector is a further development of the MPO connector connection and a trademark of the US company US Conec. MTP connectors go further in the definitions of the standards even further than the MPO connector standard in order to improve the transmission quality or the contact a bit further. The biggest change is the shape of the guide pin. While an angled pin is used with MPO, a rounded pin is used with MTP. This has the advantage that the guide pin hole of the MPO / MTP socket is less stressed, can be reconnected more frequently and thus improves the contact of the individual fibers.
The optical ferrule in the inside of the plug of MPO/MTP Trunk cable Fiber Patch Cords is available mainly with three different types of ferrule polish, which is reflected in the transmission on the attenuation value of the optical connection. One differentiates between Physical Contact (PC polish), Ultra-Physical Contact (UPC polish) and Angled Physical Contact (APC 8° angle polish). The latter variant is only available with Single-mode MPO/MTP Trunk cable Fiber Patch Cords. Due to the minimal gap in the connection of MPO/MTP Trunk cable Fiber Patch Cords to the optical interface, there is a certain attenuation. To solve this problem and to minimize the overall attenuation of the connection, there are MPO/MTP Trunk cable Fiber Patch Cords with different polished ferrules. In general one can say the higher the return-loss attenuation the better the connection quality. For our example, the PC polish type MPO/MTP Trunk cable Fiber Patch Cord leads to 40dB return-loss attenuation or higher, the UPC polish MPO/MTP Trunk cable Fiber Patch Cord type leads to 50dB return-loss attenuation or higher and an APC polish MPO/MTP Trunk cable Fiber Patch Cord type leads to 60dB return-loss attenuation or higher. The insertion loss should be less than 0.3dB. Here you can say, the lower the insertion loss, the better the performance.
BlueOptics MPO/MTP Trunk cable Fiber Patch Cords are manufactured in compliance with generally accepted industrial standards and norms and have an above-average lifetime. BlueOptics MPO/MTP Trunk cable Fiber Patch Cords also exceed standards and norms due to their properties. All BlueOptics MPO/MTP Trunk cable Fiber Patch Cords are designed for up to 1500 plug-in cycles and offer a very low input-loss as well as a very high return-loss. All BlueOptics MPO/MTP Trunk cable Fiber Patch Cords come in a flame-resistant LSZH (Low Smoke Zero Halogen) sheathing. This results in a very low smoke development compared to Patch Cords with a PVC sheathing. Furthermore, no halogen is released.
As a standard for the transmission of signals in a network today, BlueOptics MPO/MTP Trunk cable Fiber Patch Cords represent a way to build favorable high-availability connections in high-speed networks in hardware from different manufacturers. MPO/MTP Trunk cable Fiber Patch Cords of the brand BlueOptics use only high-quality brand fibers from well-known traditional companies for the production of glass products or communication technologies (for example from Corning or Fujikura) and high-quality fiber optic connectors (for example from Diamond or Reichle & De-Massari).
Please be careful with NoName and 3rd Party OEM MPO/MTP Trunk cable Fiber Patch Cords, which mostly use cheap components of Asian companies, in the worst case cheap replicas from China. These MPO/MTP Trunk cable Fiber Patch Cords have a function at the first moment, but they cannot achieve the attenuation, longevity, and quality of the products that use the MPO/MTP Trunk cable Fiber Patch Cord components of market-leading manufacturers.
As a standard for the transmission of signals in a network today, BlueOptics MPO/MTP Trunk cable Fiber Patch Cords represent a way to build favorable high-availability connections in high-speed networks in hardware from different manufacturers. MPO/MTP Trunk cable Fiber Patch Cords of the brand BlueOptics use only high-quality brand fibers from well-known traditional companies for the production of glass products or communication technologies (for example from Corning or Fujikura) and high-quality fiber optic connectors (for example from Diamond or Reichle & De-Massari).
Please be careful with NoName and 3rd Party OEM MPO/MTP Trunk cable Fiber Patch Cords, which mostly use cheap components of Asian companies, in the worst case cheap replicas from China. These MPO/MTP Trunk cable Fiber Patch Cords have a function at the first moment, but they cannot achieve the attenuation, longevity, and quality of the products that use the MPO/MTP Trunk cable Fiber Patch Cord components of market-leading manufacturers.
BlueOptics MPO/MTP Trunk cable Fiber Patch Cords only use components from marked leading manufacturers from the USA and are delivered with a warranty period of 25 years. During this time, you will receive free support for your MPO/MTP Trunk cable Fiber Patch Cord and of course you can always talk to the CBO team. In the rarely event of a fault of the MPO/MTP Trunk cable Fiber Patch Cord you will receive a new MPO/MTP Trunk cable Fiber Patch Cord, free of charge, to minimize unwanted downtime.
You need technical support or do you have questions about an optical MPO/MTP Trunk cable Fiber Patch Cord? The CBO team will be happy to help you with any question regarding your MPO/MTP Trunk cable Fiber Patch Cord and will also help you with all your questions.
BlueOptics MPO/MTP Trunk cable Fiber Patch Cords are always available in large quantities for every manufacturer. CBO can daily send MPO/MTP Trunk cable Fiber Patch Cords from a warehouse in Muelheim-Ruhr. Even large projects for MPO/MTP Trunk cable Fiber Patch Cords can be delivered very quickly. A direct pickup of MPO/MTP Trunk cable Fiber Patch Cords is also possible with CBO within the stock sale. In urgent cases, it is also possible to send MPO/MTP Trunk cable Fiber Patch Cords by direct courier service on the same working day.
You currently have a need for MPO/MTP Trunk cable Fiber Patch Cords? Please contact us now, we will be pleased to send you the MPO/MTP Trunk cable Fiber Patch Cord of your need today.
You currently have a need for MPO/MTP Trunk cable Fiber Patch Cords? Please contact us now, we will be pleased to send you the MPO/MTP Trunk cable Fiber Patch Cord of your need today.
Through a close cooperation with the logistics service provider UPS, CBO can offer various shipping options to provide you with the MPO/MTP Trunk cable Fiber Patch Cords you need as quickly as possible. Orders for MPO/MTP Trunk cable Fiber Patch Cord goods received until 16 o’ clock can be shipped on the same day. The following UPS shipping methods are available for the shipping of MPO/MTP Trunk cable Fiber Patch Cords:
Standard - Delivery of your MPO/MTP Trunk cable Fiber Patch Cord - 95% shipped within one working day
Standard - Delivery of your MPO/MTP Trunk cable Fiber Patch Cord - 95% shipped within one working day
- Express Saver - Delivery of your MPO/MTP Trunk cable Fiber Patch Cord until 12 a.m. the next working day
- Express - Delivery of your MPO/MTP Trunk cable Fiber Patch Cord until 10.30 a.m. the next working day
- Express Plus - Delivery of your MPO/MTP Trunk cable Fiber Patch Cord until 9 a.m. the next working day
- The data refer to the dispatch areas in Germany, in other countries the delivery times for MPO/MTP Trunk cable Fiber Patch Cords may differ.